Esc = N - Citizen PPU-700 Command Reference Manual

ESC = n

[Function] Data input control
[Code]
<1B>H<3D>H<n>
[Range] 0≦n≦255
[Outline] • Selecting equipment for which data input from the host is valid.
• Each bit of "n" indicates as follows.
• When the printer has not been selected, this printer abandons all the received data
until it is selected by this command.
[Caution] • Even when the printer has not been selected, it can become BUSY state through
printer operation.
• When the printer is deselected, this printer discards all the data until it is selected with
this command. (Except DLE EOT, DLE ENQ, and DLE DC4)
[Default]
ｎ＝1
Bit Equipment
0 Printer
1 Not defined
2 Not defined
3 Not defined
4 Not defined
5 Not defined
6 Not defined
7 Not defined
- 128 -
Value
0
Invalid
――
――
――
――
――
――
――
1
Valid
――
――
――
――
――
――
――