Gs 8 L P1 P2 P3 P4 M Fn [Parameter] - Citizen PPU-700 Command Reference Manual

GS ( L pL pH m fn [parameter]

GS 8 L p1 p2 p3 p4 m fn [parameter]

[Function] Specifying graphics data
[Code]
<1D>H<28>H<4C>H<pL><pH><m><fn>
<1D>H<38>H<4C>H<p1><p2><p3><p4><m><fn>
* In the explanation of function, the code of GS ( L is used.
• GS ( L and GS 8 L ) are the same function.
• When [parameter] exceeds 65533 bytes in each function, GS 8 L is used.
[Outline] Executes the processing related to the graphics data specified by the function code (fn).
fn
0,48 GS ( L pL pH m fn
2,50 GS ( L pL pH m fn
3,51 GS ( L pL pH m fn
64
65
66
67
69
112
• pL, pH specifies the number of bytes or "m" and later to （pL+pH×256）.
[Caution] • Frequent use of this command may result in damage of NV memory. Use the Write
command to NV memory in consideration of [10 times max./day].
• Following the processing of this command, printer Busy may occur during writing data
in NV memory. While the printer is Busy, it stops receiving process. Therefore, data
transmission (including real-time command) from host is prohibited.
Code
GS ( L pL pH m fn d1 d2
GS ( L pL pH m fn d1 d2 d3
GS ( L pL pH m fn kc1 kc2
GS ( L pL pH m fn a kc1
kc2 b xL xH yL yH [c
d1...dk]1...[c d1...dk]b
GS ( L pL pH m fn kc1 kc2
x y
GS ( L pL pH m fn a bx by c
xL xH yL yH d1...dk
Function No.
Function 48
Function 50
Function 51
Function 64
Function 65
Function 66
Function 67
Function 69
Function 112
- 136 -
Function.
Sends NV graphics memory
capacity.
Prints graphics data stored in
print buffer.
Sends the remaining amount
of NV graphics memory.
Sends key code list of
defined NV graphics.
Erases all data of NV
graphics in a lump.
Erases the specified NV
graphics data.
Defines raster graphics data
to NV memory.
Prints the specified NV
graphics.
Stores raster graphics data to
print buffer.