Esc T N - Citizen PPU-700 Command Reference Manual

ESC T n

[Function] Selecting the character printing direction in PAGE MODE
[Code]
<1B>H<54>H<n>
[Range] 0≦ｎ≦3、48≦ｎ≦51
0,48
1,49
2,50
3,51
[Outline] Selects the direction and start point of character printing in PAGE MODE.
[Caution] • When STANDARD MODE is selected, this command only executes the internal flagging
of the printer without affecting the printing in STANDARD MODE.
• The character mapping position will be the start point of the print area specified by
ESC W.
• The basic calculation pitch (x or y) used by the following commands varies with the
start point.
[Default]
ｎ＝0
[See Also] Appendix 4.1 "Explanation on PAGE MODE"
ESC
Printing
n
Direction
Left to right
Bottom to top
Right to left
Top to bottom
(1) If the start point is the top left or bottom right (the characters are mapped in the
direction perpendicular to the paper feed),
• Commands using x: ESC SP, ESC S, ESC ＼
• Commands using y: ESC 3, ESC J, GS $, GS ＼
(2) If the start point is the top right or bottom left (the characters are mapped in the
paper feed direction),
• Commands using x: ESC 3, ESC J, GS $, GS ＼
• Commands using y: ESC SP, ESC S, ESC ＼
$, ESC L, ESC W, ESC
Start Point
Top left
("A" in the figure)
Bottom left
("B" in the figure)
Bottom right
("C" in the figure)
Top right
("D" in the figure))
＼, GS $, GS P, GS ＼
- 37 -
A