Esc J N - Citizen PPU-700 Command Reference Manual

ESC J n

[Function] Printing and feeding paper in minimum pitch
[Code]
<1B>H<4A>H<ｎ>
[Range] 0≦ｎ≦255
[Outline] Prints the data held in the print buffer and feeds paper by [n  b asic calculation pitch]
inches.
[Caution] • After this command is executed, the beginning of the line is taken as the start position
for the next print.
• The line feed width can be set separately for the STANDARD and PAGE MODES.
• This command does not affect the line feed width defined by ESC 2 or ESC 3.
• The basic calculation pitch is set by GS P.
• Fractions resulting from calculation are corrected with the minimum pitch of the
mechanism, and the remainder is omitted.
• In STANDARD MODE, this command uses the vertical (paper feed direction) basic
calculation pitch (y).
• In PAGE MODE, this command acts differently depending on the start point:
• The maximum settable line feed width is 1016 mm (40 inches). A setting greater than
this maximum is trimmed to the maximum.
[Default] The initial value is not defined.
[Sample Program]
Refer to Sample Program and Print Results for ESC 2.
(1) If the start point specified by ESC T is top left or bottom right, the command
uses the vertical (paper feed direction) basic calculation pitch (y).
(2) If the start point specified by ESC T is top right or bottom left, the command
uses the horizontal (perpendicular to the paper feed direction) basic calculation
pitch (x).
- 15 -
・