Canon LBP-1000 Service Manual page 12

CHAPTER 1
12) Maximum power
consumption
13) Noise level (Officially announced level based on ISO 9296)
14) Dimensions
15) Weight
16) Line voltage requirements
17) Option
Notes: 1. A test print at the room temperature of 20°C with the rated voltage input.
2. When the printer is in the READY state at the room temperature of 20°C with the
rated voltage input, the time from the reception of the print instruction command
from the video controller to the end of the delivery of a A4-size print in face-down.
3. The dot ratio of 4% is equivalent to the printing ratio of 5%.
4. The size smaller than A4 is 100g/m
5. When manual duplexing, uncurl the paper delivered into the face-down tray and then
set it in the multi-purpose tray.
2. Video Controller
1) CPU
2) Memory (RAM)
3) Memory (ROM)
4) RAM slot
5) ROM slot
6) Host interface
7) Language
8) Resident font
9) Optional font
10) Scaler
Specifications are subject to change with product modification.
1 - 4
750W or less (20°C room temperature with the rated voltage input.
Including cases exceeding a second at its peak value.)
Sound power level (1B=10dB)
Sound pressure level
(Bystander position)
The above figures are the values measured when all the options
are installed.
399 (w) 414 (D) 258.7 (H) mm
About 11.5kg (printer)
About 1.2kg (cartridge)
About 1.0kg (cassette)
220 to 240V (-10%, +6%) 50/60Hz (±2Hz)
Paper feeder
2 to 163g/m
RISC Processor (PowerPC401 66MHz)
4Mbytes (Expandable to a maximum of 36Mbytes with an option)
4Mbytes (Expandable with an option)
2
3
IEEE 1284 Standard parallel interface
Standard: PCL5e plus PCL6
Standard: Adobe PostScript Level 3
45 scalable fonts (Micro Type fonts), 27 True Type fonts, 9 Bitmap
fonts
136 fonts for A-32 module
UFST
6.2B or less (printing)
4.0B or less (standby)
49dB or less (printing)
36dB or less (standby)
2 .