A. Laser/Scanner Unit - Canon LBP-1000 Service Manual

III. MAIN UNITS

A. Laser/Scanner Unit

1) Remove the EP-32 cartridge.
2) Remove the top cover unit.
3) Remove the fan
laser/scanner unit.
4) Remove the 4 screws, disconnect the
connector, and
laser/scanner unit.
Screws
Connector
Laser/scanner unit
Figure 3-3-1
Note: Do not disassemble the laser/scan-
ner unit as it cannot be adjusted in
the field
cable from the
then remove the
B. Drive Unit
1) Remove the video
according to the steps 1) through 4) on
page 3-26.
2) Disconnect the connector from the
intermediate PCB.
Connector
Figure 3-3-2
3) Remove the 7 screws and then the drive
unit.
Screws Drive unit
Figure 3-3-3
CHAPTER 3
controller unit
3 - 7