Reassembly - Canon LBP-1000 Service Manual

B. Disassembly and Reassembly
1. Removal of the pick-up roller
1) Remove the cassette.
2) Place the paper feeder upside down.
3) Unhook the 2 claws, and then remove
the 2 covers.
Claws Covers
Figure 3-9-2
< Note for reassembly >
When installing the right cover, be sure to
install the sensor lever in the positioning
guide securely.
4) Unhook the claw of the left bushing,
and then rotate the bushing to remove.
5) Unhook the claw of the right bushing,
and then rotate the bushing to remove.
Move the bushing to the right, and
remove the shaft of the cassette pick-up
roller and then the roller.
6) Remove the 2 sub rollers from the pick-
up roller.
Right bushing Left bushing
Sub rollers Pick-up roller
Figure 3-9-3
CHAPTER 3
3 - 29