Table of Contents
Advertisement
Step 3: Select the Camera Server
e
The camera servers used are arranged in the order they were selected. This
sequence applies to the following:
Note
G The camera server sequence in which camera servers are switched by
Auto Switch. (➡ P.28).
G The order in which camera server names are displayed in the "Select
from a list" styles. (➡ P.30)
G The order in which camera servers are displayed in the "Select from
previews", "Multiple Views" and "2, 4 or 6 views with a map" (➡ P.30-32)
styles.
To reorder the camera server names, click a camera server name in the
"Camera servers" box and then click the "Up" or "Down" button to change
the sequence.
In this step, you select the camera server to be
displayed in the monitoring screen. The number of
camera servers selected varies depending on the
format type. (➡ P.30-32)
The left-hand box shows a list of the available
camera servers (the camera servers registered in
Chapter 2). When you click the name of a camera
server you want to use and then click the "Add"
button, the selected camera server moves to the
right-hand box and you can view images from that
camera server in the monitoring screen.
The "Add" button adds camera servers one at a
time. To add multiple camera servers, repeat the
camera server name selection and addition
procedure. You can add all the camera servers in
the left-hand box at once by clicking the "Select All"
button.
If you do not want to use a camera server listed in
the "Camera servers" box, select the camera server
name and click the "Remove" button. To remove all
the camera servers at once, click the "Clear All"
button.
When you have completed your selections, click
"Next".
3
27
Advertisement
Table of Contents
