Table of Contents
Advertisement
Overview
The WebView Livescope MV software monitors video images shot using a Network Camera Server
VB101/VB100 (referred to hereafter simply as a camera server) and distributed via an intranet or
over the Internet.
This product consists of 2 software applications. These are the WebView Livescope MV Manager,
which can be used to create monitoring screens and collectively manage multiple camera servers,
and the WebView Livescope MV Station, which you can use to monitor camera images from
multiple locations.
The MV Manager does not require you to learn complex operation procedures since it uses a
simple interactive format to register camera servers and create monitoring screens (in HTML). The
MV Manager also allows centralized management of camera servers in multiple locations
(including setting modifications, operating status checks and batch firmware updates).
You can select and create monitoring screens from a wide range of styles, including screens with
maps, multi-locale screens and large-image screens, according to your requirements. You can
also perform tasks such as editing maps, modifying the placement of camera servers on maps,
and specifying automatic operation based on a schedule.
MV Station not only gives you access to monitoring screens created using MV Manager and
allows you complete control of the cameras, it can also display images from cameras in multiple
locations (up to 16) at the same time, providing you with a highly effective monitoring environment.
* To use VB100 camera servers, first upgrade the firmware to version 2.0.
5
Advertisement
Table of Contents
