G
Camera server addition error [04]
Message
Cause
Camera server information retrieval failed.
Check that you are using a camera server that can be used with WebView Livescope
Solution
MV and that the network address was entered correctly.
G
Camera server addition error [05]
Message
Cause
The camera server firmware version is old.
Only VB101 camera servers or VB100 camera servers with version 2.0 of the
Solution
firmware can be used with WebView Livescope MV.
For VB100 servers, upgrade the firmware to version 2.0.
G
Camera server addition error [06]
Message
Cause
The camera server is set to VIEW-Windows mode.
Solution
Set the camera server to WebView Livescope mode.
G
Camera server addition error [07]
Message
Camera server access is restricted.
Cause
Check that you have permission to access the camera server. If you do not have
Solution
permission, assign the appropriate access authority. Check also that the network
address is entered correctly.
Error Messages
65