Table of Contents
Advertisement
c
G Schedules are set for a specific camera, not for each camera server.
G You can store up to 8 schedules.
Caution
G Once you specify the camera position or backlight compensation setting,
the setting cannot be changed. To change either setting, remove the
original schedule and add a new schedule.
G You cannot switch cameras during automatic operation.
Running Automatic Operation
Automatic operation is run from the MV
Station viewer. Click the "Automatic
operation button" at the bottom of the viewer
window to set it to ON and start automatic
operation.
To switch automatic operation off, click the
button again.
* If you have not specified an automatic op-
eration schedule, the "Automatic operation"
button is grayed out.
7
55
Advertisement
Table of Contents
