Canon LBP-1760 Service Manual page 158

CHAPTER 3
5) Undo the 2 E-rings, then remove the
swing gear and the gear in the reversing
drive unit.
6) Remove the 3 screws.
E-rings Swing gear
Gear Screws
Figure 3-10-17
7) Remove the E-ring and then the swing
gear in the duplexing unit drive unit.
8) Remove the E-ring and then the 3
screws.
E-ring Swing gear
E-ring Screws
Figure 3-10-18
3 - 44
9) Lightly press the both side panels out-
ward to unhook the claws, then remove
the fan unit.
10) Remove the lower reversing guide.
Fan unit
Lower reversing guide
Figure 3-10-19
11) Disconnect the connector and then dis-
engage the cable from the cable guide.
Connector Cable
Cable guide
Figure 3-10-20