Canon LBP-1760 Service Manual page 212

Hide thumbs Also See for LBP-1760:
Table of Contents

Advertisement

CHAPTER 4
b. Setting the printer operations
Table 4-8-4 shows printer operations that can be set by combinations of switches on the print-
er driver tester.
Set the operation mode with SW1 and SW2 and various data with SW3 to SW9 according to
the table 4-8-4. Contents set by SW3 to SW9 are sent to the printer by turning ON SW11, and
the printer executes the set operations. Once SW11 has been turned ON, the set contents
remain until canceled. If multiple settings are to be made, set them one by one turning ON
SW11 each time.
To cancel the setting, set the corresponding switch back to "0" and then turn ON SW11 or
turn OFF the power switch of the ptinter.
For instance, a test print is executed when turning ON SW11 with SW1 and SW2 set to "0"
and SW4 to "1." The test print is continued until the setting is canceled by turning ON SW11
with SW4 set to "0."
4 - 50

Advertisement

Table of Contents
loading

Table of Contents