2. Photosensitive drum
Do not touch the photosensitive drum nor
clean it.
B. Transfer Charging Roller
1. Removal from the printer
1) Open the top cover.
2) Slightly lift the left shaft of the transfer
charging roller with the hook, then lift
the right shaft with the hook to remove
the transfer charging roller.
Shafts
Transfer charging roller
Figure 3-5-2
<Precautions on reassembly>
When installing the transfer charging roller,
hold the shaft and the bushing of the trans-
fer charging roller, not the rubber portion.
The bushing on the left should be push-
ing the spring when installed.
Bushing
Figure 3-5-3
CHAPTER 3
Shaft
3 - 21