CHAPTER 3
5. Removal of the lower separation
roller, upper separation roller and
torque limiter
1) Remove the lower cover and top cover
units.
2) Remove the E-ring, the gear, then the
bushing.
E-ring
Gear
Bushing
Figure 3-9-9
3) Remove the E-ring, the bushing, then
remove the lower separation roller and
the shaft together.
E-ring
Bushing
Lower separation roller
Figure 3-9-10
3 - 38
4) Unhook the claw, move the separation
roller, and remove the parallel pin.
Then remove the lower separation
roller.
5) Take out the upper separation roller
and the torque limiter from the guide.
Guide
Upper separation roller
Torque limiter
Figure 3-9-11