Feed Roller Unit - Canon LBP-1760 Service Manual

H. Feed Roller Unit
1. Removal from the printer
1) Remove the multi-purpose tray unit
according to the steps 1) through 9) on
page 3-14.
2) Disconnect the connector of the feed
roller clutch cable.
3) Remove the 2 screws and then the feed
roller unit.
Connector Screws

Feed roller unit

Figure 3-3-20
<Precautions on reassembly>
When reassembling the feed roller unit,
wire the clutch correctly so that the clutch
wire does not touch the gears.
2. Disassembly and reassembly
a. Feed roller clutch
1) Release the E-ring, remove the gear,
then take out the feed roller clutch.
E-ring Gear
Feed roller clutch
Figure 3-3-21
CHAPTER 3
3 - 17