Envelope Feeder - Canon LBP-1760 Service Manual

IX. ENVELOPE FEEDER
1. Removal of external covers
a. Bottom cover
1) Remove the 2 screws, then slide the bot-
tom cover in the direction of the arrow
to remove it.
Screws Bottom cover
Figure 3-9-1
b. Top cover unit
1) Remove the bottom cover.
2) Undo the snaps on both sides and
remove the weight.
3) Unhook the 2 claws and then lift the top
cover unit to remove it from the frame.
4) Remove the 2 screws and then the
ground wire and cable holder.
5) Disconnect the connector on the PCB
and separate the top cover unit.
Screws Ground wire
Cable holder Connector
Top cover unit
Figure 3-9-2
CHAPTER 3
3 - 35