Canon LBP-1760 Service Manual page 14

CHAPTER 1
Manual duplexing
(Note 3)
11) Environment
Temperature
Humidity
Air pressure
12) Power consumption
13) Noise level (Officially announced level based on ISO 9296)
14) Dimensions
15) Weight
16) Line voltage requirements
17) Options
Notes: 1. At the room temperature of 20°C with rated voltage input.
2. When the printer is in READY state at a room temperature of 20°C, the time from
reception of the PRINT signal from the video controller until an A4-sized print is deliv-
ered to the face-down or face-up tray.
3. When manual duplexing, correct the curl of the print delivered in the face-down tray
before setting it in the multi-purpose tray.
2. Video Controller
1) CPU
2) RAM
3) ROM
4) ROM DIMM socket
5) RAM DIMM socket
6) Host interface
7) Language
8) Resident fonts
9) Optional fonts
10) Scalar
Specifications are subject to change with product modification.
1 - 4
ed paper).
Plain paper (60g/m 2 ~ 105g/m
purpose tray only
7.5 ~ 32.5°C
5 ~ 90%RH
747 ~ 1013hPa (560 ~ 760mmHg/equivalent to 0 ~ 2,600m above
the sea level)
1100W or less (20°C room temperature, with rated voltage input)
Sound power level (1B=10dB)
Sound pressure level
(Bystander position)
The above figures are the values measured when all the options
are installed.
400 (W) 507 (D) 346 (H) mm
About 18kg (printer with cassette)
About 1.5kg (EP-52 cartridge)
100-127V (-10%, +6%) 50-60Hz (±2Hz)
200-240V (-10%, +6%) 50-60Hz (±2Hz)
Paper feeder, duplexing unit, envelope feeder
RISC processor: Intel 960HD-50
Standard: 4MB
Maximum: 36MB
4MB
3
2
Standard: IEEE 1284 parallel interface
Option : expansion interface (Ethernet, Token Ring)
Standard: PCL 6, PCL 5e plus PCL-XL
Option : Adobe PostScript Level 3
45 Scalable fonts (MicroType fonts), 8 Bitmap font
136 fonts
UFST
2 recommended paper) on multi-
6.6B or less (600dpi, printing)
4.4B or less (standby)
53dB or less (600dpi, printing)
33dB or less (standby)