Retrieving Backup System Software; To Restore Backup System Software; Troubleshooting - Canon ColorPASS-Z20e Service Manual

CHAPTER 4 DISASSEMBLY/ASSEMBLY

6.1 Retrieving Backup System Software

The restore backup function can be used for troubleshooting system problems. When you
restore system software the ColorPASS configuration is returned to default settings.
Do not interrupt the system while the Restore Backup function is in
progress. If this occurs you will need to reinstall system software from the
Memo
CD.

6.1.1 To Restore Backup System Software

1. If you have not done so already, print the following from the Functions menu (if pos-
sible):
• Configuration page—Records the customer's current Setup configuration
The Setup configuration will be reset to the default configuration when backup sys-
tem software is restored.
• Font List—the Font List details the fonts that are resident on the ColorPASS HDD.
Along with the fonts provided, the customer may have installed additional fonts that
will be deleted when the backup system software is restored.
2. Access the Functions menu and then select Reboot System from the Shut Down menu
(shown below).
3. When the diagnostics begin, press the fourth line selection button to access the Service
menu.
4. Select Restore Backup from the Service menu.
4-38
Restart Server
Shut Down System
Reboot System
SShut Down
F04-601-01
Install Software
Restore Backup
Install Option
Start System
Service
F04-601-02
COPYRIGHT© 2000 CANON INC.
Select
Select
2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000