Canon ColorPASS-Z20e Service Manual page 30

CHAPTER 2 PREPARING FOR INSTALLATION
5) Insert five screws into the holes on the
supports of the ColorPASS as shown in
the following illustration. Tighten the
screws.
Upper side three places TP screws
(M4×10).
Lower side two places RS tightening
screws (M4×33).
6) Fix the power cable in place to the
ColorPASS using three cable clamps.
2-12
Inserting screws into ColorPASS supports
COPYRIGHT© 2000 CANON INC.
F02-400-05
F02-400-06 Fix the power cable
2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000