Canon ColorPASS-Z20e Service Manual page 29

3) Insert the ColorPASS bosses into the
holes on the copier top edge as shown
in F02-400-03.
4) Mount the ColorPASS to the copier
with three screws (M4×6) (CLC1100
series).
Attach the face plates (round) to the
ColorPASS after fixing the unit in
place.
The CLC900 series copier requires only
two screws for ColorPASS installation.
COPYRIGHT© 2000 CANON INC.
CHAPTER 2 PREPARING FOR INSTALLATION
2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
F02-400-03 Inserting ColorPASS bosses
F02-400-04
Installing ColorPASS mounting screws
2-11