Canon ColorPASS-Z20e Service Manual page 87

5. When the following screen is displayed, make sure "Yes" is displayed and then select
OK. The restore backup process will begin immediately.
Wait while the ColorPASS Control Panel displays screens that indicate that the software
is being restored.
6. At the message "Install Fiery?", press the OK line selection button.
7. When a language selection screen appears, scroll to the appropriate language and press
the OK line selection button.
8. Configure Setup using the Configuration page you printed earlier.
Bypass settings not included on the Configuration page if it is more appropriate for the
network administrator to set them. See the Configuration Guide for more information.
9. Reinstall fonts or custom simulations that may have been deleted due to system software
restoration.
COPYRIGHT© 2000 CANON INC.
All data will be
deleted. Continue?
Yes
Restore Backup
F04-601-03
2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 4 DISASSEMBLY/ASSEMBLY
OK
Select
4-39