Guide To Service Mode - Canon NP6317 Service Manual

C.

Guide to Service Mode

SERVICE PROGRAMS
Display Function
C0 Auto exposure sensor monitor-
ing.
C1 Auto exposure adjusting.
C2 Register A-side adjusting.
C3 Blank A-side adjusting.
C4 Curve adjusting.
C5 Register B-side adjusting.
C6 Blank B-side adjusting.
C7 Lens focus 50% adjusting.
C8 Lens focus 200% adjusting.
C9 Fuser temperature adjusting.
C10 Lens home-position sensor ad-
justing.
C11 Mirror home-position sensor
adjusting.
C12 Cassette sensor monitoring.
C13 Nip area cycle starting.
C15 Default auto exposure re/set-
ting.
C16 Copier configuration monitor-
ing.
C17 Control panel LEDs checking.
C18 EEPROM memory initializing.
C21 Automatic shut-off setting.
C22 Main switch shut-off check
C23 Universal cassette code setting.
C24 Lamp brightness 50% adjusting.
C25 Lamp brightness 200% adjust-
ing.
COPYRIGHT © 1999 CANON INC.
Range
---
0 to 50
0 to 63
0 to 63
0 to 63
0 to 63
0 to 63
0 to 65
0 to 65
130 to
230
0 to 63
0 to
255
---
0/1
0 to 5
---
---
0/1
---
0 to 6
100 to
185
100 to
185
Table 10-801
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
Default Note
---
25 0.10 Volt/step
32 0.25 mm/step
32 0.25 mm/step
32 0.25 mm/step
32 0.25 mm/step
32 0.25 mm/step
0.0037 %/step
---
0.15 %/step
---
180 [°C]
32 0.113 %/step
95 0.05 mm/step
Display code
Fixing nip
---
1 Enable/diable
0 Factory only
Turn all LEDs
---
on.
---
1 Enable/disable
shut-off copier
---
0 For U cassette
124
145
Note
A higher setting changes the
lens focus parameter.
A higher setting changes the
lens focus parameter.
A higher setting changes the
lens position enlargement.
See Table 10-802.
For checking fixing pressure
after fixing roller replace-
ment.
Used to test the main shut
off switch.
For setting the universal cas-
sette size, see Table 10-803.
For adjusting the exposure
lamp (LA1).
For adjusting the exposure
lamp (LA1) .
10-67