I.
BASIC OPERATION
A.
Changing the Reproduction Ratio
The reproduction ratio across the drum is varied by changing the position of the lens and the
position of No. 4 and No. 5 mirrors. It is moved by the lens drive system. The reproduction ratio
around the drum is varied by changing the speed of the scanner. Figure 3-101 shows how the
position of the lens and mirror is varied to change the reproduction ratio across the drum.
100%
50%
200%
The scanner drive system changes the reproduction ratio around the drum by varying the speed
at which mirror 1 moves relative to the peripheral speed of the drum. (The scanner consists of
mirror 1 and the scanning lamp.)
The mirror speed is higher than the drum peripheral speed for REDUCTION and lower for
ENLARGEMENT.
Note:
For DIRECT copying, the speed of the mirror is the same as the peripheral speed of the
drum.
COPYRIGHT © 1999 CANON INC.
Figure 3-101
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
Lens
No. 4/5 mirror
3-1