Checking The Operation - Canon NP6317 Service Manual

C.

Checking the Operation

Step
1 Turn the door switch ON using the door
switch actuator.
2 Connect the power plug, and shift the
POWER switch to "ON".
3 Set the cassette size to suit the needs of the
user.
4 Put copy paper in the cassette, and set the
cassette in the copier.
5 Set the copy tray on the copier.
6 Open the copyboard cover, and remove the
protection seal and the cushions.
7 Record the reading of the copy counter.
8 After making any copies of the following,
the COPY START key goes red.
[1] making 7 continuous copies on A3
[2] making 9 continuous copies on A4
[3] making 5 single copies on A3
[4] making 5 single copies on A4
9 Check that the counter operates properly.
COPYRIGHT © 1999 CANON INC.
Work
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
Remarks
Check that the ADD PAPER and CAS-
SETTE OUT indicators go ON and the
WAIT indicator lights red.
See p. 8-8.
• Check that the ADD PAPER indicator goes
OFF.
• Press the keys, except the COPY START
key, on the control panel, and check that
each operation is correct.
Check the following:
• No abnormal sound is heard.
• The ADD TONER indicator starts to flash
when the Copy key on the control panel
turns red at the end of copying for any of
the following:
[1] making 7 continuous copies on A3
[2] making 9 continuous copies on A4
[3] making 5 single copies on A3
[4] making 5 single copies on A4
Check that the reading has increased by 2
from the reading recorded in step 7.
8-5