2.
Feeder Belt
1) Detach the feeder assembly.
2) Remove the two screws, and detach the
rail cover found at the front.
3) Remove the two screws found at the front
that hold the corona assembly rail in
place.
COPYRIGHT © 1999 CANON INC.
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
[1] Screws
Figure 5-318
[1] Screws
[2] Corona assembly rail
Figure 5-319
[1]
[2]
[2] Rail cover
[2]
[1]
5-19