Chapter 8 Installation; Location - Canon NP6317 Service Manual

I. LOCATION
The location of the copier should be chosen based on the following considerations. If possible,
make a visit to the user for a study of the site before delivery of the copier.
a. The ambient temperature should be between 15° and 35°C and the humidity, 10% to 80%.
Avoid locations near water faucets, humidifiers, water boilers, and refrigerators.
b. Avoid locations near open fire or subject to dust or ammonia fumes and direct rays of the sun.
Provide curtains over the windows if necessary.
c. Choose a well-ventilated place.
d. Make sure all feet of the copier will be in contact with the pedestal.
e. Allow at least 10 cm from any wall to provide access.
COPYRIGHT © 1999 CANON INC.
10 cm min.
1.5 m min.
2 m min.
Figure 8-101
10 cm min.
1.5 m min.
Figure 8-102 (with sorter)
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 8 INSTALLATION

Copier
Copier
2.5 m min.
8-1