4) Disconnect the shorting connector [1].
5) Connect the relay cable [1] to the control
card connector [2] and the control panel
PCB connector [3].
6) Route the cable [1] as shown in Figure 8-
605.
COPYRIGHT © 1999 CANON INC.
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
Figure 8-603
[2]
[1]
Figure 8-604
[1]
Figure 8-605
[1]
[3]
8-11