CHAPTER 5 PICK-UP/FEEDING SYSTEM
4) Remove the two screws, and detach the
terminal holder found at the rear.
5) Remove the two screws found at the rear,
and detach the corona assembly rail.
6) Detach the feeder belt.
5-20
COPYRIGHT © 1999 CANON INC.
[1]
[1] Screws
Figure 5-320
[2]
[1]
[1] Screws
[2] Corona assembly rail
Figure 5-321
[1]
[1] Feeder belt
Figure 5-322
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[2] Terminal holder