Feeder Assembly - Canon NP6317 Service Manual

B.

Feeder Assembly

1.

Feeder Assembly

Note:
Make sure that the drum unit transfer co-
rona assembly and developing assembly
have been detached before detaching the
feeder assembly.
1) Release the feeder assembly
2) Detach the DC contoroller PCB.
3) Remove the E-ring, and detach the bush-
ing
4) Detach the inside cover, and remove the
E-ring; then, detach the bushing.
5) Disconnect the connector, and detach the
grounding wire (1 screw); then, detach the
cord mount (1 screw).
COPYRIGHT © 1999 CANON INC. CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
[1] E-ring
Figure 5-315
[1]
[3]
[1] E-ring
[3] Grounding wire
Figure 5-316
[2]
[1]
[2] Bushing
[2]
[4]
[2] Bushing
[4] Cord mount
5-17