Select Humidity Setpoints - Peco T8000 Operating Manual

SELECT HUMIDITY SETPOINTS

SELECT HUMIDITY SETPOINTS SELECT HUMIDITY SETPOINTS
Adjust the Dehumidify Setpoint.
Press Humidity to view more options and to select a
Dehumidify Setpoint.
i
Note: Instruction assumes a humidity
sensor is installed and dehumidifier is
enabled (see Service Menu 490).T8532-
IAQ models must be ordered separately.
PRESS ANY KEY TO BEGIN
If the thermostat is model T8532-IAQ, a
humidity sensor is present. A humidity sensor
allows user to set dehumidify and humidify
control setpoints.
1. Press to view options.
More
2. Press
Humidity
Note: "DE" appears in clock area. The
Dehumidify Setpoint shows with %.
3. Press ▲/ ▼to select the desired
Dehumidify Setpoint.
4. Press
Next.
5. Press ▲/ ▼to select the desired
Humidify Setpoint.
6. Press Done. Settings are saved.
to view more options.
20