Peco T8000 Operating Manual page 22

PROGRAM A HOLIDAY (CONT.) PROGRAM A HOLIDAY (CONT.) PROGRAM A HOLIDAY (CONT.)
i
Note: Select the Heat Setpoint (and
the Cool Setpoint) for the holiday after
selecting the number of days the holiday
period lasts.
PRESS ANY KEY TO BEGIN
Now select the Heat and Cool Setpoints for
the same holiday number (e.g., "1").
8. Press ▲/ ▼to select the Heat Setpoint,
then Next.
9. Press ▲/ ▼to select the Cool Setpoint,
then Next.
Optional: To program multiple holidays,
wait for the Holiday number to fl ash
(after step 9). Press ▲/ ▼to select a
new Holiday number; repeat steps 3-9.
10. Press
DONE
display mode.
i
Note: If "Heat" or "Cool" flashes during
process, the deadband value will be
enforced; the opposing Heat or Cool
Setpoints will be automatically adjusted
(for an explanation of deadband value,
see Key operation).
to complete the holiday
22