Load Sd Card Settings - Peco T8000 Operating Manual

LOAD SD CARD SETTINGS

LOAD SD CARD SETTINGS LOAD SD CARD SETTINGS
When the SD card is inserted, the
flashing. Icon stops flashing when processing data.
Press Paste to copy the settings from SD card to
the thermostat.
i
Note: If SD card is locked, only
appears; user may only copy from SD
card to thermostat.
Use the SD card to transfer customized
SD icon begins
settings to or from the thermostat. Insert the
SD card into the thermostat only from Home
or Default Display.
1.
2.
3.
4.
Paste
PRESS ANY KEY TO BEGIN
Insert the SD card into the slot located
on top of the thermostat where indicated.
(SD icon begins fl ashing).
Note: and
Copy
Press to copy the settings from
Paste
SD card to the thermostat.
Press to transfer the settings from
Copy
the thermostat to the SD card.
Press
Go Back
i
Note: After selecting one of the above
options, the SD card display remains
active until user selects
the SD card is removed (or menu reverts
to Default Display).
options appear.
Paste
to complete process.
and
Go Back
23