Select Humidity Setpoints - Peco T12500 Operating Manual

SELECT HUMIDITY SETPOINTS

SELECT HUMIDITY SETPOINTS SELECT HUMIDITY SETPOINTS
Press the Humidity key to switch between
Dehumidification and Humidification Setpoint.
Adjust the Dehumidification Setpoint by pressing the
arrow keys.
i
Note: Instruction assumes humidity sensor
is installed and is enabled (see Service
Menu 490). Integrated sensors (not
included) must be ordered separately.
PRESS TOUCHSCREEN TO BEGIN
If thermostat is model T12532-IAQ, a humidity
sensor is present, which allows user to set
dehumidify and humidify control setpoints.
1. Press lower left and lower right keypad
area to activate Service Menus.
2. Press
Cool
490.
3. Select appropriate option to enable
Dehumidify, Humidify, or both (1, 2 ,or 3).
4. Press
Done
5. Press
Humidity
Setpoint. Beside "dE" Press ▲/ ▼to
select desired Dehumidify Setpoint.
6. Press
Humidity
Setpoint. Next to "hu" Press ▲/ ▼to
select desired Humidify Setpoint.
7. Press
Done
▲/ ▼for Service Menu
to return to Home Display.
key to set Dehumidify
key to view Humidify
to save and exit.
20