Program Override - Peco T8000 Operating Manual

PROGRAM OVERRIDE

PROGRAM OVERRIDE PROGRAM OVERRIDE
Example shows how to select a
temporary period in System Auto mode.
i
Note: Setpoints available depend on the
system mode selected (see "Select System
Preferences"). Override display options
can be defined in Service Menus.
i
Note: The installer setup can limit the
length of time for an override to 1, 2, 3, or
4 hours beyond the current time.
Cool Setpoint for a
PRESS ANY KEY TO BEGIN
Override allows application of temporary heat
or cool settings. (Example uses System Auto.)
1. Press Override, or ▲/ ▼key.
Note: Setpoint fl ashes. "Hold until" time
appears and is changed to show length
of override (up to the maximum hold time
specifi ed in Service Menu 395).
2. Press ▲/ ▼to select a Cool Setpoint,
then press Next.
3. Press ▲/ ▼to select a Heat Setpoint,
then press Next.
4. Press ▲/ ▼to adjust time (in 15-minute
periods) until override remains in effect.
5. Press to save changes and exit.
Done
Note:
Override
effect until the time period ends.
Note: Press
Cancel
remains (fl ashing) in
to exit Override.
19