SeleCT The fahRenheiT oR CelSiUS TemPeRaTURe
In the PROG menu, press ▲or ▼to scroll to
select the flashing option.
Set the temperature display using the
following simple steps. Settings are saved
automatically after you exit the PROG mode.
1. Press PROG once.
2. Press ▲or ▼to scroll until BOTH
"°F/°C" are flashing.
3. Press PROG once to enter the
temperature menu for "°F/°C" .
i
note: Either "°F" or "°C" will flash as an
option.
4. Press ▲or ▼to scroll to select the
flashing option as desired (°F / °C).
5. To select desired option, press PROG
once.
15