Program Override - Peco T12500 Operating Manual

PROGRAM OVERRIDE

PROGRAM OVERRIDE PROGRAM OVERRIDE
Example shows how to select a Cool Setpoint that
lasts until 12:30 pm in System Auto mode.
i
Note: Available setpoints are determined
by the system mode selected (see "Select
system mode").
i
Note: The installer setup can limit override
to 1, 2, 3, or 4 hours beyond current time.
PRESS TOUCHSCREEN TO BEGIN
Override allows temporary override of heat or
cool settings (example uses System Auto).
1. Press
Override
Note: "Hold until" time appears and is
changed to show length of override (up
to the maximum hold time specifi ed in
Service Menu 395).
2. Press
Cool
Setpoint.
3. Press
Heat
Setpoint.
4. Press ▲/ ▼to adjust time (in 15-minute
increments) override remains in effect.
5. Press
Done
Note:
Override
effect until the time period ends.
Note: Press
key.
▲/ ▼to select a Cool
▲/ ▼to select a Heat
to save changes and exit.
remains (fl ashing) in
to exit Override.
Cancel
19