Loading Documents; Using The Automatic Document Feeder (Adf) - Ricoh SP 1200SF User Manual

Loading documents

Using the automatic
document feeder (ADF)
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard
2
80 g/m paper and always fan the pages
before putting them in the ADF.
Recommended environment
Temperature: 20 to 30° C
Humidity: 50% - 70%
Paper: Xerox Premier 80 g/m
2
Business 80 g/m
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper-clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
To scan non-standard documents see
Using the scanner glass on page 22.
Make sure documents written with ink are
completely dry.
2
2
2
2
or Xerox
Loading paper and documents
Documents to be faxed must be from 148
to 215.9 mm wide and from 148 to
355.6 mm long, and of a standard weight
2
(80 g/m ).
a
Unfold the ADF document output
support flap (1) and the ADF support
flap (2).
Note
For legal paper, close the ADF document
output support flap (1), and then take each
individual sheet off the ADF output tray
after scanning.
b
Fan the pages well.
c
Place your document, face up top edge
first, in the ADF until you feel it touch the
feed roller.
d
Adjust the paper guides (1) to fit the
width of your document.
1
2
2
1
21