Cisco IE-3000-8TC Message Manual page 73

Switch system
Hide thumbs Also See for IE-3000-8TC:
Table of Contents

Advertisement

Chapter 2
Message and Recovery Procedures
contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see
the
Error Message SPANTREE-5-EXTENDED_SYSID: Extended SysId [chars] for type [chars].
Explanation
spanning tree. If enabled, the spanning-tree instance identifier is stored in the lower portion of the
bridge ID priority field and limits the allowed values for the bridge priority from 0 to 61440, in
increments of 4096. If disabled, the bridge ID priority field consists only of the configured priority,
but some spanning-tree features might not be available on a given platform (for example, support
for 4096 VLANs). On some platforms, this feature might be mandatory. The first [chars] is the
extended system ID state (enable or disable), and the second [chars] is the spanning-tree instance.
Recommended Action
Error Message SPANTREE-5-ROOTCHANGE: Root Changed for [chars] [dec]: New Root Port
is [chars]. New Root Mac Address is [enet].
Explanation
interface ID for the previous root port, the second [chars] is the interface ID for the new root port,
and [enet] is the Ethernet address of the new root port.
Recommended Action
Error Message SPANTREE-5-TOPOTRAP: Topology Change Trap for [chars] [dec].
Explanation
Recommended Action
Error Message SPANTREE-6-PORTADD_ALL_VLANS: [chars] added to all Vlans
Explanation
Recommended Action
Error Message SPANTREE-6-PORTDEL_ALL_VLANS: [chars] deleted from all Vlans
Explanation
Recommended Action
OL-13020-01
"Error Message Traceback Reports" section on page
The extended system ID feature is either enabled or disabled for the given type of
No action is required.
The root switch changed for a spanning-tree instance. The first [chars] and [dec] is the
No action is required.
A trap was generated because of a topology change in the network.
No action is required.
The interface has been added to all VLANs. [chars] is the added interface.
No action is required.
The interface has been deleted from all VLANs. [chars] is the deleted interface.
No action is required.
1-4.
Cisco IE 3000 Switch System Message Guide
SPANTREE Messages
2-59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie 3000

Table of Contents