Cisco IE-3000-8TC Message Manual page 44

IDBMAN Messages
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message IDBMAN-3-PORTNOTINAGGPORT: [chars]([dec] / [dec]) is not present in
Aggport [chars [([dec] / [dec]).
Explanation
was found not to be. The first [chars] is the interface name, and the second [chars] is the port-channel
name. The ([dec] / [dec]) are the slot and port numbers (slot/port).
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message IDBMAN-3-VLANNOTSET: [chars]: Vlan [dec] not set since it already has
Vlan [dec].
Explanation
[chars] is the interface name. The first [dec] is the recently configured VLAN ID, and the second
[dec] is the currently assigned VLAN ID.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message IDBMAN-4-ACTIVEPORTSINAGGPORT: [chars]( [dec] / [dec] ) has [dec]
active ports, but is being removed.
Explanation
port-channel name, and the ([dec] / [dec]) are the slot and port number (slot/port). The last [dec] is
the number of currently active ports.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Cisco IE 3000 Switch System Message Guide
2-30
An internal error has been detected. A port that was supposed to be in an aggregate port
Copy the message exactly as it appears on the console or in the system log.
An interface VLAN was not set to the requested value because of an internal error.
Copy the message exactly as it appears on the console or in the system log.
An internal error removed an aggregate port that has active ports. [chars] is the
Copy the message exactly as it appears on the console or in the system log.
Chapter 2 Message and Recovery Procedures
1-4.
1-4.
1-4.
1-4.
"Error
"Error
"Error
"Error
OL-13020-01