Cisco IE-3000-8TC Message Manual page 32

EC Messages
Error Message EC-5-CANNOT_ALLOCATE_AGGREGATOR: Aggregator limit reached, cannot
allocate aggregator for group [dec].
Explanation
Recommended Action
the same aggregator.
Error Message EC-5-CANNOT_BUNDLE1: Port-channel [chars] is down, port [chars] will
remain stand-alone.
Explanation
up. The first [chars] is the EtherChannel. The second [chars] is the port number.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE2: [chars] is not compatible with [chars] and will
be suspended ([chars]).
Explanation
For the interface to join the bundle (EtherChannel), change the interface attributes to match the
EtherChannel attributes. The first [chars] is the interface to be bundled, the second [chars] is the
physical interface (a switch port or a routed port) that is already in the bundle, and the third [chars]
is the reason for the incompatibility.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in
channel [dec] and cannot attach to them ([chars]).
Explanation
channel. [chars] is the incompatible port. [chars] is the short interface name, [dec] is the channel
group number, and the last [chars] is the reason.
Recommended Action
port.
Error Message EC-5-COMPATIBLE: [chars] is compatible with port-channel members.
Explanation
channel or ports within the port channel. The system has detected that the attributes of the port now
match the port-channel attributes. [chars] is the affected port.
Recommended Action
Cisco IE 3000 Switch System Message Guide
2-18
A new aggregator cannot be allocated in the group. [dec] is the affected group.
Change the port attributes of the ports in the group so that they match and join
The aggregation port is down. The port remains standalone until the aggregation port is
Ensure that the other ports in the bundle have the same configuration.
The interface has different interface attributes than the other ports in the EtherChannel.
Change the interface attributes to match the EtherChannel attributes.
The port has different port attributes than the port channel or ports within the port
For the port to join the bundle, change the port attributes so that they match the
A port was not operational because its attributes were different from those of the port
No action is required.
Chapter 2 Message and Recovery Procedures
OL-13020-01