Flash_Device Messages; Gbic_Security Messages - Cisco IE-3000-8TC Message Manual

Switch system
Hide thumbs Also See for IE-3000-8TC:
Table of Contents

Advertisement

Chapter 2
Message and Recovery Procedures

FLASH_DEVICE Messages

This section contains the flash device messages.
Error Message FLASH-1-DEVICE_REMOVED: Flash device removed
Error Message FLASH-6-DEVICE_INSERTED: Flash device inserted

GBIC_SECURITY Messages

This section contains the Cisco Gigabit Interface Converter (GBIC) and small form-factor pluggable
(SFP) module security messages. The GBIC and SFP modules have a serial EEPROM that contains the
serial number, security code, and cyclic redundancy check (CRC). When the module is inserted into the
switch, the software reads the EEPROM to recompute the security code and CRC. The software
generates an error message if the CRC is invalid or if the recomputed security code does not match the
one stored in the EEPROM.
The Cisco IE 3000 switch supports SFP modules and does not support GBIC modules. Although the
Note
error message text refers to GBIC interfaces and modules, the messages from the switch actually refer
to the SFP module interfaces and modules.
Error Message GBIC_SECURITY-4-EEPROM_CRC_ERR: EEPROM checksum error for GBIC in
[chars].
Error Message GBIC_SECURITY-4-EEPROM_READ_ERR: Error in reading GBIC serial ID in
[chars].
OL-13020-01
Explanation
The compact flash card has been removed from the switch. There is no access to the
flash file system.
To access the flash file system, reinsert the compact flash card.
Recommended Action
Explanation
The compact flash card has been inserted into the switch. There is now access to the
flash file system.
No action is required.
Recommended Action
Explanation
The GBIC in the specified port has invalid EEPROM data. [chars] is the port in which
the GBIC is inserted.
Remove the GBIC from the port.
Recommended Action
Explanation
An error occurred while the switch was reading the GBIC type from the EEPROM.
[chars] is the port in which the GBIC is inserted.
Remove the GBIC from the port.
Recommended Action
FLASH_DEVICE Messages
Cisco IE 3000 Switch System Message Guide
2-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie 3000

Table of Contents