Extended Ptt; Repeating A Voice Announcement; System Settings - Becker Traffic Pro 7949 Operating Manual

Settings

Extended PTT

If the function is active, voice mode can
be activated automatically by pressing
, , or
can input a voice command directly.
Note:
The abbreviation PTT stands for "Push
To Talk".
Select in the voice mode
X
settings.
7012
X Turn the rotary control/push button
to switch the function on ( ) or off
( ).
98

Repeating a voice announcement

If the function has been switched on and
route guidance is active, the last naviga-
and you tion announcement can be repeated or an
updated navigation announcement out-
put by pressing
X Select
voice mode settings.
7013
X Turn the rotary control/push button
to switch the function on ( ) or off
( ).

System settings

You can configure various basic settings
on your Traffic Pro to meet your require-
ments in the system settings.
The following possible settings are
.
available:
in the
For
• Setting for speed-dependent increase
in volume with
• Setting for acoustic signal volume
with
• You can use
whether a change in volume should be
displayed in graphics format.
• Setting for the volume level of digital
to analogue audio sources with
• Setting for or switching on/off of sub-
woofer output
:
to select
.