Registering The Handset To The Base Station; Configuring Handsets On Base Station - VTech VSP715A Configuration Manual

VTech IP Phone Configuration Guide

4. Registering the handset to the base station

On the handset, go to the menu (User settings>Registration). Select Handset, and
press NEXT to start registration.
On the base station, press the HANDSET LOCATOR button for at least four seconds,
then release the button. Both LEDs on the base station begin to flash.
Press the # key on the handset to begin registration. The process takes up to 10
seconds to complete.
When the first handset registers, it beeps and the screen displays HANDSET 1.

5. Configuring handsets on base station

Go to the menu (System>Handset Settings>Handset Name), and define a name for
the handset. To identify which handset you are using, you can check the main
interface of the handset display. If configuration is done, the new handset name will be
shown on the main interface of the handset display.
Figure - Handset Name Page
13/17