Installing The Control Unit; Overview - AT&T MERLIN LEGEND Release 2.0 Installation Section

Installing the Control Unit

If you have not read Chapter 1, do so before continuing with any instructions
in this chapter.

Overview

Installing the control unit involves the following, which this chapter describes
in detail:
1. Installing the backboard
2. Meeting the power and grounding requirements
3. Checking the total unit load
4. Installing the basic carrier
5. Installing any expansion carriers specified for the system
6. Installing the power supply
7. Installing the processor
8. Installing the trunk/station modules
These are referred to as modules throughout this guide.
2
2-1
Overview