Installing The Control Unit - AT&T MERLIN 1030 Installation Manual

Installing the Control Unit

You need the following components to install the control unit:
Control Unit Installation Kit
It comes with the control unit and includes line cord labels, jumper cord
labels, telephone location labels, five 7-foot line cords, and a system
directory.
Control unit
It contains a Power Module (with a power cord), a Processor Module, a
Line Module, and a Voice Terminal Module.
Feature Module
It provides the system's advanced features.
You may also need the following components, depending on the size and
specific makeup of your system:
Additional modules
They provide for additional outside telephone lines, voice terminals, stan-
dard telephones, off-premises telephones, and features such as Paging,
Music-on-Hold, and Power Failure Transfer.
Model 1030 Expansion Unit
This addition to the control unit expands your system's capacity to 30 out-
side lines and 70 voice terminals.
NOTE: Feature Module 3 and, under certain conditions, Feature Module 4
change the system's capacity. If you have Feature Module 3 or 4, see the admin-
istration manual that comes with the module.
10