Figure 3-24. Inserting The Conductors Into The Connecting Blocks - AT&T MERLIN LEGEND Release 2.0 Installation Section

Installing Telephones and Adjuncts
c. Punch down the telephone wires to the termination block.
i.
Route the telephone wires underneath the termination
block and through the fanning slots.
ii. Insert the conductors into the designated 110 connecting
blocks already on the termination block. Follow the color
sequence shown in Figure 3-24.

Figure 3-24. Inserting the Conductors into the Connecting Blocks

iii. Use the D-impact tool to seat the conductors. See Figure
3-25.
3-50
Connecting the Telephones to the Control Unit