AT&T MERLIN LEGEND Release 2.0 Installation Section page 279

Initializing and Testing the System
Programming Guides
Programming Summary for quick-reference procedures
Document Number 555-620-144
System Programming for detailed procedures
Document Number 555-620-111
System Programming and Maintenance (SPM) for detailed SPM
procedures
Document Number 555-620-142
Restoring from the System Programming
Diskette
If you received the Release 2.0 system programming diskette, follow the
procedure in this section to initialize the system.
1. Perform a System Erase:
Menu → Maintenance → Slot → 00 → Enter → Demand Test →
System Erase (Line 5, left button) twice → Yes
See the Maintenance and Troubleshooting guide for additional
information on System Erase.
2. Use the system programming diskette to perform the Restore
procedure from the PC via SPM.
See the System Programming and Maintenance (SPM) guide for
instructions.
NOTE:
The system must be restored from the system programming diskette (or a
backup diskette) whenever a frigid start (System Erase) occurs.
7-2
Initializing the System