Figure 3-2. Remove Desk Stand And Module Cover - AT&T MERLIN LEGEND Release 2.0 Installation Section

Installing Telephones and Adjuncts
RISK OF ELECTRICAL SHOCK: Follow all warnings and cautions.
Follow these steps to install and replace an MFM and change its pin settings.
1. Remove the
user card tray from the bottom of the desk stand on the
telephone.
2. Remove the
desk stand and the module cover. See Figure 3-2:
P u l l
P r e s s
Telephone
S t a n d
Module Cover

Figure 3-2. Remove Desk Stand and Module Cover

3-5
Installing the Multi-Function Module