Figure 3-17. Removing The Handset Holder; Figure 3-18. Rotating The Handset Holder - AT&T MERLIN LEGEND Release 2.0 Installation Section

Installing Telephones and Adjuncts
If you are mounting an MLX-10 or MLX-10D wall
telephone, go to Step 5.
If you are assembling a desk telephone, go to Step 6.
5. Prepare the handset holder for wall mounting.
a. Remove the handset holder by pushing it up and pulling it out.
See Figure 3-17.

Figure 3-17. Removing the Handset Holder

b. Rotate the handset holder 180 degrees and replace it in its slot.
See Figure 3-18.

Figure 3-18. Rotating the Handset Holder

3-39
Assembling the MLX Telephone